en English

Causes and solutions for friction-driven wire mesh Belt not tracking properly

When a friction-driven wire mesh belt isn’t tracking properly, it can cause significant operational issues. The common causes and solutions for this problem are as follows:

Common Causes

  1. Belt Tension Imbalance: If the tension across the belt is not uniform, it can lead to improper tracking.
  2. Misaligned Rollers or Drums: Rollers or drums that are not aligned correctly can cause the belt to drift to one side.
  3. Worn or Damaged Components: Wear and tear on components such as bearings, rollers, or the belt itself can lead to tracking issues.
  4. Improper Belt Installation: Incorrect installation of the belt can cause it to run off track.
  5. Contamination: Debris or buildup on the belt or rollers can create uneven surfaces, affecting tracking.
  6. Thermal Expansion: Changes in temperature can cause the belt material to expand or contract unevenly, leading to misalignment.
  7. Structural Issues: Problems with the conveyor frame or structure can cause misalignment.


  1. Adjust Belt Tension: Ensure that the tension is evenly distributed across the width of the belt. This may require adjusting tensioning devices.
  2. Align Rollers and Drums: Check the alignment of all rollers and drums and adjust them as necessary to ensure they are parallel and level.
  3. Replace Worn or Damaged Components: Regularly inspect the belt and conveyor components for wear and damage, replacing any that are compromised.
  4. Proper Installation: Follow manufacturer guidelines for belt installation to ensure it is set up correctly from the start.
  5. Clean the Belt and Rollers: Regularly clean the belt and rollers to remove any debris or buildup that could affect tracking.
  6. Monitor Temperature Changes: If thermal expansion is an issue, consider materials that have better temperature stability or install temperature controls.
  7. Inspect and Correct Structural Issues: Check the conveyor frame and structure for any misalignments or defects and make necessary corrections.

Additional Tips

  • Use Tracking Devices: Installing belt tracking devices can help maintain the proper position of the belt.
  • Regular Maintenance: Implement a routine maintenance schedule to catch and address issues early.
  • Training: Ensure that personnel are properly trained in belt maintenance and troubleshooting.

Addressing these causes with appropriate solutions should help in maintaining proper tracking of a friction-driven wire mesh belt, ensuring smooth and efficient operation.

Thank you for taking the time to read this blog post, if you wish to know more about this topic, please feel free to contact us today at Saryee Belting.

Tel: +8618830800262

Email: sales@saryeebelting.com

WhatsApp: 86-18830800262